Write Text - Nokia N80 Manual

9244700_N80-1_en_zh.book Page 43 Thursday, March 23, 2006 2:34 PM
Tip! When you have opened any of the default
folders, to switch between the folders, press
or .
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select
command in the main view of Messag..
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions, from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select
broadcast. In the main view, you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.

Write text

ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
Traditional text input
is displayed when you write text using traditional
text input.
• Press a number key (
desired character appears. There are more characters
Options > Service
available for a number key than are printed on the key.
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
• To insert a space, press
next line, press
Options > Cell
Predictive text input
You can enter any letter with a single keypress.
Predictive text input is based on a built-in dictionary to
which you can add new words.
you write text using predictive text input.
1
To activate predictive text input, press
Predictive text
for all editors in the device.
— ) repeatedly until the
. To move the cursor to the
three times.
is displayed when
, and select
on. This activates predictive text input
43