Nokia N80 Manual page 105

9244700_N80-1_en_zh.book Page 103 Thursday, March 23, 2006 2:34 PM
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with .
Network mode (shown only if supported by the network
operator)—Select which network to use. If you select
mode, the device uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator selection—Select Automatic
search for and select one of the available networks,
or Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is,
the operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement
In the standby mode,
Dual
and that the headset is unavailable, or a Bluetooth
connection to a headset is lost.
connected and
Select Headset, Loopset,
handsfree, or Music stand
to set the device to
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See "Profiles—set tones", p. 90.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
Ringing type is set to
answer is disabled. Automatic answer is not available for
Text phone.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
On to set the device to indicate
indicates a headset is connected,
indicates a loopset is
that a Text phone is connected.
Text phone, Bluetooth
and from the following:
Beep once or Silent, automatic
103