Replace The Earcup And Headband Cushion - Telex Ascend Series Manual

Replace the Earcup and Headband Cushion

There are two (2) cushion replacement points on the Ascend Headset; two (2) ear cup cushions for dual-sided headsets (one
(1) ear cup cushion for single-sided headsets) and one (1) headband cushion.
To replace the ear cup cushion, do the following:
Grasp the old ear cushion and pull it off the ear cup.
1.
Starting at the top of the ear cup, place the top part of the back flap of the new ear cushion over the top lip of the
2.
ear cup.
NOTE: The ear cup cushion hole orients to the bottom of the ear cup.
FIGURE 17.
Using your fingers, work the back flap of the ear cushion around the ear cup.
3.
Carefully pull the bottom of the ear cushion over the bottom lip of the ear cup.
4.
To replace the headband cushion, do the following:
Grasp the headband cushion.
1.
Pull the old cushion off the headband.
2.
FIGURE 18.
20
Top Part of the Back Flap – Ear Cushion
Headband Replacement