Turn The Anr On/Off (Anr Capable Headset Only) - Telex Ascend Series Manual

Turn the ANR On/Off (ANR Capable Headset Only)

ANR is used to reduce unwanted noise in the headset from the surrounding environment. The ANR switch is located on the
left ear shell, as seen in Figure 15.
ANR Switch
FIGURE 15.
To turn ANR on, do the following:
On the left ear cup, move the ANR switch to the up position.
>
To turn ANR off, do the following:
On the left ear cup, move the ANR switch to the down position.
1.
Remove battery to conserve battery power when not in use.
2.
NOTE: The battery slowly discharges if left in the headset.
17