Operation And Maintenance; Operation Instructions; Remove And Replace Modules - Telex Ascend Series Manual

Operation Instructions

Remove and Replace Modules

All input modules, batteries, filler modules, etc. are removed and replaced the same way.
When removing a module, put only enough pressure on the module release button to pop the module
IMPORTANT:
out. The module release button is designed to be used with fingers only.
Do not use any sharp objects or tools to press the module release button.
To remove a module, do the following:
Press the module release button located at the bottom of the ear shell.
1.
The module pops up from the ear shell.
Module Release Button
FIGURE 8.

Operation and Maintenance

CHAPTER 3
13