3. Install mesh bags to bagger frame. Make sure that
the heat-resistant side of the mesh bags faces the
unit. See Figure 16.
The heat resistant side (smooth side)
Mesh Bags
4. Close hood assembly and connect latch strap. See
Figure 17.
Figure 17
Install Hose
See Figure 18.
1. Install bagger hose on bagger boot assembly and
bagger cover assembly.
2. Flip up thumb latch and push bagger hose into the
latch. Flip down the latch, making sure the latch is
attached to a rib on the hose.
MUST face the unit.
Figure 16
Bagger Hose
Latch
Strap
14
Thumb Latch
Figure 18