Gravely Ariens 815134 Owner's/Operator's Manual page 11

INSTALL BAGGER BOOT
MODEL 815150
See Figure 9.
1. Lift discharge chute and slide bagger boot bracket
under discharge chute.
NOTE: Discharge chute can remain attached to deck.
2. Insert bagger boot fully onto discharge opening
making sure that the hole and notch in the top of the
boot line up over exposed deck bolts.
3. Attach rear boot strap to the rear attaching post.
4. Attach front boot strap to the front attaching post.
Bagger Boot
Connect rear
boot strap to
deck post.
Connect front
boot strap to
deck post.
Figure 8
INSTALL FRAME AND HOOD ASSEMBLY
1. Install receiver to the right rear frame using two 3/8
x 1" hex bolts and two 3/8" locking nuts. Tighten
hardware. See Figure 10.
11
Discharge
Chute
Boot
Bracket
Front Deck Bolt
Front Boot Hole
Rear Deck Bolt
Boot Notch
Connect rear
boot strap to
deck post.
Connect front
boot strap to
deck post.
Figure 9