5. Remove the protective cover from the supplied
stylus pen.
Note:
Discard the removed protective cover.
6. Set the stylus pen in the place shown in the illus-
tration.
X. Affixing the panel sheet
Affix the supplied panel sheet to the surface of the
operation panel.
Note:
• The panel sheet is affixed on customer request.
• The panel sheet must be kept by the customer.
XI. Installing the user's guide holder
Install the user's guide holder.
A2X0IXC068DA
XII. Installing the set guide for banner
paper
Open the manual bypass tray and set the set guide
for banner paper.
A2X0IXC023DA
XIII. Connecting the power cord
1. Connect the power cord.
Note:
This step may not be performed depending on the
applicable marketing area.
A2X0IXC052DA
E-10
A2X0IXC024DA
A2X0IXC025DA
A0P0IXE075DA