[Control Device Setup] - Panasonic ET-MDNFB10 Operating Instructions Manual

[CONTROL DEVICE SETUP]

Enable/disable the button operations on the control panel and the remote control of the projector.
1) Select [SECURITY] from the main menu.
2) Press the <ENTER> button.
f The [SECURITY] screen is displayed.
Enter the security password set on the projector, and press the <ENTER> button.
3) Press as to select [CONTROL DEVICE SETUP].
4) Press the <ENTER> button.
f The [CONTROL DEVICE SETUP] screen is displayed.
5) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL]
[REMOTE CONTROL]
6) Press the <ENTER> button.
f The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
7) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
8) Press qw to switch to [USER].
f The limitation of the control from the control panel or the remote control of the projector can be set.
[ENABLE]
[DISABLE]
[USER]
9) Press as to select [INPUT SELECT BUTTON], and press the <ENTER> button.
f The [INPUT SELECT BUTTON] screen is displayed.
10) Press as to select [SLOT1 BUTTON], [SLOT2 BUTTON], or [SLOT BUTTON].
11) Press qw to switch the item.
f The items will switch each time you press the button.
[TOGGLE]
[SDI OPT1 [SLOT1]]
[SDI OPT2 [SLOT1]]
[SDI OPT1 [SLOT2]]
[SDI OPT2 [SLOT2]]
[SDI OPT1 [SLOT]]
[SDI OPT2 [SLOT]]
[DISABLE]
*1 This is displayed when [SLOT1 BUTTON] is set and this Interface Board is installed in <SLOT 1>.
*2 This is displayed when [SLOT2 BUTTON] is set and this Interface Board is installed in <SLOT 2>.
*3 This is displayed when [SLOT BUTTON] is set and this Interface Board is installed in <SLOT>.
12) Press the <MENU> button.
f Returns to the [CONTROL PANEL] screen or the [REMOTE CONTROL] screen.
13) Press as to select [APPLY], and press the <ENTER> button.
f The confirmation screen is displayed.
14) Press qw to select [OK], and press the <ENTER> button.
Note
f When a button operation is performed on the device set to [DISABLE], the [CONTROL DEVICE PASSWORD] screen is displayed.
Enter the control device password.
f The [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approximately 10 seconds.
Menu navigation
Sets the limitation on the control from the control panel of the projector.
Sets the limitation on the control from the remote control of the projector.
Enables all button operations.
Disables all button operations.
Operation of all buttons can be enabled/disabled separately.
Switches the input of the Interface Board installed in the corresponding slot in turn when the button is
operated.
Fixes to selection operation of the SDI OPT1 input of the Interface Board.
*1
Fixes to selection operation of the SDI OPT2 input of the Interface Board.
*1
Fixes to selection operation of the SDI OPT1 input of the Interface Board.
*2
Fixes to selection operation of the SDI OPT2 input of the Interface Board.
*2
Fixes to selection operation of the SDI OPT1 input of the Interface Board.
*3
Fixes to selection operation of the SDI OPT2 input of the Interface Board.
*3
Disables button operations.
ENGLISH - 19