Table of Contents
Advertisement
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
How to assign a program
1)
Select [PROJECTOR SETUP] from the main menu.
2)
Press the <ENTER> button.
f The [PROJECTOR SETUP] screen is displayed.
3)
Press as to select [SCHEDULE].
4)
Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
5)
Select and assign a program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f You can set the program from No.1 to No.7. "- - -" indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1)
Select [PROJECTOR SETUP] from the main menu.
2)
Press the <ENTER> button.
f The [PROJECTOR SETUP] screen is displayed.
3)
Press as to select [SCHEDULE].
4)
Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
5)
Press as to select [PROGRAM EDIT].
6)
Press qw to select a program number, and press the <ENTER> button.
7)
Press as to select a command number, and press the <ENTER> button.
f You can change the page using qw.
8)
Press asqw to select [TIME], and press the <ENTER> button.
f The projector is in the adjustment mode (the time is blinking).
9)
Press qw to select "hour" or "minute", and press as or the number (<0> - <9>) buttons to set a
time, and then press the <ENTER> button.
10) Press asqw to select [COMMAND].
11) Press the <ENTER> button.
f The [COMMAND] detailed setting screen is displayed.
12) Press as to select [INPUT], and press the <ENTER> button.
13) Press asqw to select the input to be set.
16 - ENGLISH
Menu navigation
Disables the schedule function.
Enables the schedule function. Refer to "How to assign a program" (x page 16) or "How to set a
program" (x page 16) for how to set the schedule.
Advertisement
Table of Contents
