Warranty Declaration; Technical Specifications - STEINEL IS 3180 Manual

Service remote control RC8 EAN 4007841 592806
Additional functions, RC8
– Time setting CH1
– Test / normal mode
– Twilight setting
– Night-time operation
– Daylight operation
– Teach-IN
– Reset
Smart Remote EAN 4007841 009151
– Control via smartphone or tablet
– Replaces remote controls RC5 and RC8
– Download the appropriate app and connect via Bluetooth
– Initial state; behaviour after applying the light ON/OFF supply voltage
8� Operation / maintenance
The infrared sensor can be used for switching light ON and OFF automatically. The
unit is not suitable for burglar alarm systems as it is not tamperproof in the manner
prescribed for such systems. Weather conditions may affect the way the motion
detector works. Strong gusts of wind, snow, rain or hail may cause the light to come
ON when it is not wanted because the sensor is unable to distinguish between sud-
den changes of temperature and sources of heat. The detector lens may be cleaned
with a damp cloth if it gets dirty (do not use cleaning agents).
9� Warranty Declaration
As purchaser, you are entitled to your statutory rights against the vendor. If these
rights exist in your country, they are neither curtailed nor restricted by our Warranty
Declaration. We guarantee that your STEINEL Professional sensor product will remain
in perfect condition and proper working order for a period of 5 years. We guarantee
that this product is free from material-, manufacturing- and design flaws. In addition,
we guarantee that all electronic components and cables function in the proper man-
ner and that all materials used and their surfaces are without defects.
32
Making Claims
If you wish to make a claim, please send your product complete and carriage paid
with the original receipt of purchase, which must show the date of purchase and
product designation, either to your retailer or contact us at STEINEL (UK) Limited,
25 Manasty Road, Axis Park, Orton Southgate, Peterborough, PE2 6UP, for
a returns number. For this reason, we recommend that you keep your receipt of
purchase in a safe place until the warranty period expires. STEINEL shall assume
no liability for the costs or risks involved in returning a product.
For information on making claims under the terms of the warranty, please go to
www�steinel-professional�de/garantie
If you have a warranty claim or would like to ask any question regarding your product,
you are welcome to call us at any time on our Service Hotline 01733 366700.
10� Technical specifications
IS 3180 IS 3360/
IS 3360 MX
Dimensions Surface-mounted installation, round, Ø 126 × 65 mm
(L × W × H) Surface-mounted installation, square, 95 × 95 × 65 mm
Concealed installation, round, Ø 124 × 78 mm
Concealed installation, square, 94 × 94 × 78 mm
Output
Incandescent lamps, max. 2000 W at 230 V AC
Fluorescent tube, max. 1000 W
at cos j = 0.5, inductive load at 230 V AC
8 x max 58 W each, C ≤ 176 µF
at 230 V AC *
Mains power 220-240 V, 50 / 60 Hz max. 2.5 mm
supply
Angle of 180° with 360° with
coverage 90° angle of 180° angle of
aperture aperture
IS 345 IS 345 MX
2
180° with 180° with
45° angle of 45° angle of
aperture aperture
33