Fiber Optic Ethernet Ports - Siemens SIMATIC NET RUGGEDCOM RSG2300 Installation Manual

Specifications
For specifications on the available copper Ethernet ports, refer to
Port Specifications (Page
4.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Reg-
istered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
1
1
2
Figure 4.4
1
1
2
Figure 4.6
RUGGEDCOM RSG2300
Installation Manual, 01/2020, C79000-G8976-1046-15
Pin
10/100Base-TX
3 TX+
4 Reserved (Do Not Connect)
5 Reserved (Do Not Connect)
6 TX-
7 Reserved (Do Not Connect)
8 Reserved (Do Not Connect)
32)".
2
Tx Connector
Rx Connector
MTRJ Port
Tx Connector
Rx Connector
SC Port
Name
1000Base-TX
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
1
Tx Connector
1
Rx Connector
2
Figure 4.5
2
1
Tx Connector
1
Rx Connector
2
Figure 4.7
Communication Ports
4.2 Fiber Optic Ethernet Ports
Description
Transmit Data+ or Bi-
Directional Pair B+
Transmit Data+ or Bi-
Directional Pair C+
Receive Data- or Bi-
Directional Pair C-
Transmit Data- or Bi-
Directional Pair B-
Receive Data- or Bi-
Directional Pair D+
Receive Data- or Bi-
Directional Pair D-
"Copper Ethernet
2
LC Port
2
ST Port
25