Adjusting Microphone Sensitivity - Philips AVENT SCD535 Manual

EngliSh
14
3 If the ECO mode is off, the display shows 'On?'. Press the OK button to switch on the ECO
mode. If the ECO mode is on, the display shows 'Off?'. Press the OK button to switch off the
ECO mode.
If you have set the ECO mode to 'on', the parent unit switches off and on again. The ECO
,
mode symbol appears on the display of the baby unit and the parent unit to indicate that
both units now operate in ECO mode.
Note: The connection between parent and baby unit may be lost when the ECO mode is switched on. If
this happens, the operating range may be too large for the ECO mode. In this case, either reduce the
operating range or switch off the ECO mode.
nightlight on/off
1 Select 'Light' with the + and - buttons.
2 Press the OK button to confirm.
3 If the nightlight is off, the display shows 'On?'. Press the OK button to switch on the
nightlight. If the nightlight is on, the display shows 'Off?'. Press the OK button to switch off
the nightlight.
lullaby function
Selecting a lullaby
1 Select 'Lullaby' with the + and - buttons.
2 Press the OK button to confirm.
3 Press the + button once or several times to select one of the five lullabies from the list or to
select 'Play All'.
4 Press the OK button to confirm.
When you have selected one of the five lullabies, it is played 5 times in a row.
When you select 'play all', all 5 lullabies are played once.
Switching to another lullaby
1 Press the + button to choose another lullaby from the list.
2 Press the OK button to confirm.
pausing a lullaby
1 Press the OK button.
The message 'Paused' appears on the display.
,
2 Press the OK button again to resume the lullaby.
If you do not resume the lullaby within 30 seconds, the lullaby function switches off automatically.
The message 'Paused' and the lullaby symbol disappear from the display.
Stopping a lullaby
1 Press the + button to select 'Stop' from the list.
2 Press the OK button to confirm.

adjusting microphone sensitivity

Note: You can only adjust the microphone sensitivity in the menu of the parent unit.
You can set the microphone sensitivity of the baby unit to the desired level. You can only change the
microphone sensitivity when a connection between the baby unit and the parent unit has been
established, i.e. when the LINK light on the parent unit lights up green continuously.