Getting Started
Login (Using the Control Panel)
Follow the procedure below to log on when Basic Authentication, Windows Au-
thentication, LDAP Authentication, or Integration Server Authentication is set.
1
A
Press [Enter] for [Login User Name].
B
Enter a login user name, and then press [OK].
C
Press [Enter] for [Login Password].
D
Enter a login password, and then press [OK].
E
Press [Login].
When the user is authenticated, the screen for the function you are using ap-
pears.
Note
❒ "Authentication has failed."appears if the authentication failed. Check the
login user name and login password.
❒ If user code authentication is enabled, a different screen appears. See "Au-
thentication Information", General Settings Guide.
26