Assistance
For assistance, call toll free:
1-800-243-3050
or visit our website:
www.philips.com/norelco
Information is available 24 hours a day, 7 days a
week.
Battery Removal
◗
This Philips Norelco Groomer contains a
rechargeable Nickel-Cadmium battery, which
must be disposed of properly (fig. 36).
◗
Battery should only be removed when
Groomer is to be discarded.
◗
All servicing or battery replacement should be
performed by the Philips Norelco Service
Location.
◗
For assistance, call toll free: 1-800-243-3050 or
visit our website: www.philips.com/norelco.
1
Unplug electrical cord from outlet and
Groomer before dismantling Groomer.
2
Allow the Groomer to run until the
batteries are completely empty/depleted.
Turn Groomer off.
3
Insert a narrow, flat blade screwdriver in the
groove next to the shaft at the top of the
Groomer (fig. 37).
4
Turn the screwdriver to separate the two
housing halves.
5
Lift the battery out of the housing using the
screwdriver (fig. 38).
6
Twist and bend the battery connections until
they break.
7
Remove the battery from the Groomer.
8
Do not attempt to replace battery. Insulate
battery ends by covering with tape and/or
place battery in a small plastic bag. Discard
Groomer.
9
Contact your local town or city officials for
battery disposal information or call
1-800-8-BATTERY or www.rbrc.com for
drop-off locations.
28
31
34
37
29
32
35
38
30
33
36