Cleaning; During Use; After Each Use - Philips Norelco G370/65 User Manual

Cleaning

◗
Do not use water or a moist cloth to clean
the Groomer.
◗
Always switch Groomer OFF before cleaning.
◗
Do not use abrasive, scourers or liquids such
as alcohol, benzene, bleach or acetone to clean
the Groomer and attachments.
◗
Never clean, replace or remove Groomer
attachments with motor ON.
◗
Do not apply pressure to cutters.
◗
Do not touch cutters with hard objects as this
may damage them.
◗
Do not use while bathing, showering or
immerse the Groomer in water or other
liquids as damage to Groomer may occur.

During Use:

◗
If cut hairs have accumulated in the Guide
Comb area, remove hairs by shaking, blowing
or using cleaning brush provided. Remember to
adjust the trimming length back to your
selected setting when you replace the guide
comb on Groomer.

After Each Use:

1 Make sure the Groomer is switched OFF
and disconnected from the electrical outlet.
2 Remove any attachment.
3 Also separate the top part of the mini
shaver attachment from its body (fig. 28).
4 Blow and/or shake out any hair that may
have accumulated in the attachment.