Advertisement
C
Remove the hairs from the cutters and guards
with the brush supplied.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit, press the wheel and turn it
clockwise.
Cause 3: the shaving heads are damaged or worn.
B
Remove the retaining frame.
Remove the old shaving heads from the
shaving unit and replace them with new ones
Damaged or worn shaving heads (cutters and
guards) may only be replaced with original HQ6
Philishave Quadra shaving heads.
Put the retaining frame back into the shaving
unit, press the wheel and turn it clockwise.
2
The shaver does not work when the on/off
button is pressed.
Cause: the battery is empty.
B
Recharge the battery. See chapter 'Charging'.
ENGLISH
13
Advertisement
