Siemens SIMATIC ET 200SP Manual page 21

Power loss
Power loss, typ.
Address area
Address space per module
Address space per module, max.
Hardware configuration
Fieldbus connection via separate transceiver
Digital inputs
Number of inputs
Input characteristic curve acc. to IEC 61131, type 1
Input characteristic curve acc. to IEC 61131, type 3
Input voltage
Type of input voltage
Rated value, DC
For signal "0"
For signal "1"
Permitted voltage at input, min.
Permitted voltage at input, max.
Input current
For signal "1", typ.
Input delay (for rated value of input voltage)
For standard inputs
Configurable
•
Cable length
Cable length shielded, max.
Cable length unshielded, max.
Encoders
Supported encoders
2-wire sensor
Permissible quiescent current (2-wire sensor), max.
•
Interfaces
Number of RS 485 interfaces
Interrupts/diagnostics/status information
Interrupts
Diagnostics interrupt
Diagnostics alarms
Diagnostics
Monitoring of supply voltage
Wire break
Short-circuit
DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)
Manual, 07/2014, A5E03574157-AC
6ES7131-6BF00-0BA0
1 W
1 byte; + 1 byte for QI information
Yes
8
Yes
Yes
DC
24 V
-30 to 5 V
11 to 30 V
-30 V
30 V
2.5 mA
Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each
case + delay of 30 to 500 µs, depending on cable length)
1000 m
600 m
Yes
1.5 mA
0
Yes
Yes
Yes
Yes
Yes
Technical specifications
6.1 Technical specifications
21