Baxi Luna 3 Silver Space Series Operating & Installation Instructions Manual page 51

The shower function optimises DHW control, for example, when someone is taking a shower.
The function delivers DHW at a lower than rated temperature.
To modify the maximum temperature of the shower function, proceed as described in section 4.3.
This function can be manually enabled as follows:
• Press one of the two buttons
(SHOWR appears on the display for a few seconds followed by HW SS);
• press OK while the delivery temperature and the symbol
• the function lasts 60 minutes (the symbol
At the end of this period, DHW temperature returns to that of the operating mode set before the function activated
(the symbol not longer flashes on the display).
N.B.: to disable the function before the 60 minute period terminates, proceed as follows:
• press one of the two buttons
• press OK, to display "HW S^ ".
4.3 CHANGE TEMPERATURE VALUES OF THE FUNCTIONS ASSOCIATED WITH THE
To change the temperature value, proceed as follows:
• Press IP to enable the PROGR function;
• press to scroll the functions to modify, as described in the following table:
Function Display
The set temperature flashes
COMFR
(factory value = 20°C)
The set temperature flashes
ECONM
(factory value = 18°C)
The set temperature flashes
NOFRS
(factory value = 5 °C)
The set temperature flashes
SHOWR
(factory value = 40°C)
• To change the value of the selected function, press
• To exit, press IP
4.4.1 TIMED SHUTDOWN (HOLIDAY PROGRAMME)
ambient temperature is assured (factory setting 5°C). This setting may be modified as described in section 4.3 under
"NOFRS".
To enable the function, proceed as follows:
• press and set the "AUTO" function (symbol );
• press MM 60 appears on the display and the symbols flash.
INSTRUCTIONS FOR USERS
4.2 SHOWER FUNCTION
+/-
( ) and then to enable the function
flashes during this time).
+/-
( ) and then ;
Description of function
Boiler in heating mode at rated temperature.
Boiler in heating mode at reduced temperature.
Boiler in heating mode at preset frost protection ambient temperatu-
re.
Boiler in DHW mode at the preset temperature.
+/-
4.4 TIMED FUNCTIONS (
51
flashes on the display;
;
BUTTON)
BUTTON
925.523.1 - EN