MONDY DAY 1
TUEDY
DAY 2
WEDDY
DAY 3
(Wednesday)
THUDY
DAY 4
(Thursday)
FRIDY
DAY 5
SATDY
DAY 6
(Saturday)
SUNDY
DAY 7
To set a single time band, proceed as follows:
1) Press IP and then
2) select a day of the week (1...7) by pressing
3) press OK;
4) the display shows on 1 and the four time digits start flashing, as
shown in the following figure;
+/-
5) press
to set the boiler switching on time;
6) press OK;
7) the display shows of 1 and the four time digits start flashing;
+/-
8) press
to set the boiler switching off time;
9) press OK;
10) repeat the operations from point 4 onwards to set the remaining
three time bands;
11) press IP to exit the function.
Programming in
HEATING mode
N.B.: If switching on time on... is set at the same time as switching off time of..., the time band is cancelled and the
programme moves on to the next time band.
(e.g.: on1=09:00 – of1=09:00. the programme "skips" time band 1 and continues to on2...).
INSTRUCTIONS FOR USERS
On 1
Of 1
(Monday)
(Tuesday)
06:00
08:00
(Friday)
(Sunday)
;
+/-
FACTORY SETTINGS
On 2
Of 2
On 3
11:00
13:00
17:00
repeatedly;
48
Of 3
On 4
23:00
24:00
PROGRAMMED TIME BAND
09:00 - 12:00
Day of the Week
MONDAY
925.523.1 - EN
Of 4
24:00