Philips 26HF7955H/27 User Manual page 18

Installation
1. Press the > button to enter into
the CHANNEL INSTALL menu.
SETUP
LANGUAGE
COMMUNICATION
CHANNEL INSTALL
AUTO INSTALL TV
CABLE TUNING
USE CHANNEL TABLE
CURRENT RING
DIGITAL SETUP
CONFIGURATION
• Press the > button to enter into
the CHANNEL INSTALL menu.
CHANNEL INSTALL
CHANNEL INSTALL
CHANNEL
INPUT
CHANNEL LOGO
DIGITAL
RINGS
LABEL
MUTE
2. Selecting a channel
• Select the channel by using the Digit
0 - 9 buttons.
• For Cable mode, channel selection is
from 01 - 250.
• For Antenna mode, selection of
channel is from 02 - 250.
• In order to input a three digit channel,
the TV must be configured to allow
three digit channel entry. Please see
page 26 under "3 DIGIT ENTRY"
for instructions on how to do this.
16
3.
ENGLISH
>
>
>
NO
NO
RING1
>
>
TV 2
TUNER
>
NO
(1 ) (2 ) (3 ) (4 )
( ) >
NONE
4.
Selecting an input source
• Select TUNER, AV, SVIDEO, CVI,
VGA, HDMI, CARD-CVBS,
CARD-YC or CARD CVI.
Note : Card-YC, Card CVI, and
Card CVBS are available on certain
models only.
• If TUNER is selected, you can
assign a logo to the channel (refer to
CHANNEL LOGO section below).
You can also access DIGITAL
options (refer to DIGITAL section
on page 18 ).
CHANNEL INSTALL
CHANNEL INSTALL
CHANNEL
INPUT
CHANNEL LOGO
DIGITAL
DIGITAL CH SCROLL
DIGITAL MAJOR CH
DIGITAL MINOR CH
RINGS (1 ) (2 ) (3 ) (4 )
LABEL
MUTE
Assigning a channel logo / text to
the channel
• Press the > button to enter into the
CHANNEL LOGO mode display
CHANNEL INSTALL
CHANNEL INSTALL
CHANNEL
INPUT
CHANNEL LOGO
DIGITAL
DIGITAL CH SCROLL
DIGITAL MAJOR CH
DIGITAL MINOR CH
RINGS (1 ) (2 ) (3 ) (4 )
LABEL
MUTE
• Use P + / – to access the available
logo pages and the < > < > buttons
to navigate and select the logo.
TV 2
TUNER
>
YES
>
1
0
( ) >
NONE
TV 2
TUNER
>
YES
>
1
0
( ) >
NONE