Table of Contents
Advertisement
Switching the Ink
STEP 1: Updating the Printer Unit Firmware
Use the file that you have downloaded to update the firmware of the printer unit to a version that supports MAX 3 ink. For
the update method, refer to "readme.pdf," the file that you downloaded at the same time as the firmware.
STEP 2: Switching the Ink
1.
Display the [CHANGE INK SET] menu.
Press
.
2.
Switch the ink cartridges.
CAUTION
WARNING
CAUTION
Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.
Discharged fluid contains toxic ingredients. Never attempt to incinerate discharged fluid or discard it with ordinary trash.
Also, do not dispose of it in sewer systems, rivers, or streams. Doing so may have an adverse impact on the environment.
Press
Press
Press
Press
Press
Press
Press
When the screen on the left is displayed, remove the drain bottle and
discard the discharged fluid.
Use the included drain funnel to transfer the discharged fluid from the printer's drain
bottle to the included drain bottle.
Before you detach the drain bottle, be sure to wait for the screen to display "EMPTY
DRAIN BOTTLE." After discarding the discharged fluid, promptly attach the drain bottle
to the machine.
Failing to follow this procedure may cause discharged fluid to flow out of the machine and
spill, soiling your hands or the floor.
Never place discharged fluid or ink near an open flame.
Doing so may cause a fire.
To store discharged fluid temporarily, place it in the included drain bottle or in a du-
rable sealed container such as a metal can or polyethylene tank, and cap the container
tightly.
Any spillage or vapor leakage may cause a fire, an odor, or physical distress.
several times to display the screen shown on the left.
.
several times to display the screen shown on the left.
, then
.
.
or
to select [YES].
.
ECO-SOL MAX 3 Ink Switching Method
5
Advertisement
Table of Contents
