Changing A Particular Option - Samsung AM015JNVDKH User Manual

Changing a particular option

You can change each digit of set option.
Option SEG1
Explanation PAGE
Remote
Controller
Display
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication and
Details
0
• When changing a digit of an indoor unit address setting option, set the SEG3 as 'A' .
NOTE
• When changing a digit of indoor unit installation option, set the SEG3 as '2' .
Ex) When setting the 'buzzer control' into disuse status.
Option SEG1
Explanation PAGE
Indication
• If you are using heat pump model, mixed operation mode (two or more indoor units operating
in different operation mode simultaneously) is not available when the indoor units are
connected to same outdoor unit. If you set the master indoor unit with a remote controller,
outdoor unit will operate in the mode which was set in the master indoor unit.
SEG2
The option mode
MODE
you want to change
Auto Auto
On On
Option
D
mode
SEG2 SEG3
The option mode you
MODE
want to change
0 D 2
English-49
SEG3 SEG4
The tens' digit of an
option SEG you will
change
Cool
On
Tens' digit
1~6 0~9
of SEG
SEG4
The tens' digit of an The unit digit of an
option SEG you will option SEG you will
change
1
SEG5 SEG6
The unit digit of an
option SEG you will Changed value
change
Cool
On
On
The
Unit digit
0~9 changed
of SEG
value
SEG5 SEG6
Changed value
change
7 1
Dry
0~F