Changing A Particular Option - Samsung MCM-D211UN Installation Manual

Setting an address and installation option of Universal Comm. Kit

Changing a particular option

You can change each digit of set option.
Option
Explanation
Remote
Controller
Display
Indication Details Indication
Indication
and Details
•
•
NOTE
Ex) When setting the 'buzzer control' into disuse status.
Option
Explanation
Indication
Setting discharge temperature control
1.
not and also can set targeted temperature of heating and cooling. Refer to "Installation/service setting
2.
to room set temperature and room temperature. Discharge temperature control is carried out while
thermostat is on.
The discharge temperature control can be set using DMS, also.
Discharge temperature may not meet the desired temperature(set value) depending on conditions of the
external air.
3.
42
Option mode to
MODE
change
Details Indication Details
Option
D
mode
Option mode
MODE
D
option SEG to
change
Indication Details
Tens'
digit of
SEG
of an option
to change SEG to
change
Unit digit of an
option SEG to Changed value
change
Indication Details Indication
Unit
Changed
digit of
value
SEG
Unit digit of
an option Changed
SEG to value
change
Details