Using the Turbo function
You can set the Turbo function to provide fast and powerful cooling (heating).
When the air conditioner is operating in Cool or Heat mode;
Remote controller display
1. Press the Options button.
2. Press the <, > or Options button until (Turbo) indicator starts to blink.
3. Press the SET button to set the Turbo function.
- (Turbo) (Turbo) indicator will be displayed on the remote controller display
and Turbo function will operate for 30 minutes.
f Press the Options button press the <, > or Options button to
Cancel
make the (Turbo) indicator blink and press the SET button.
• Turbo function is only available in Cool/Heat mode.
❋ ❋ Heat mode operates with MR-EH00/MR-EH00U model only.
NOTE
• If the Turbo function is selected while Quiet function is on, the Quiet
function will be cancelled.
• Air flow direction can be adjusted with every direction.
❋ ❋ Duct type model cannot adjust air flow direction up and down.
• Temperature and fan speed cannot be adjusted.
English-22