Conventions; Table 1-2 Conventions On Markups; Table 1-3 Conventions On Terminology - Siemens SIPROCESS GA700 Operating Instructions Manual

1.5

Conventions

Overview
To allow easier navigation within this documentation, the tables below provide information on
the use of markups and terminology.
Table 1-2
Representation
type
"Add screen"
"File > Edit"
<F1>, <Alt+P>
[1] to [6]
[1. ...] to [6]
→
Table 1-3
Term
Local user inter‐
face
Auto hotspot
"See also"
Rack-mounted device
Operating Instructions, 05/2015, A5E31874006-03
Conventions on markups
Scope
● Terminology that appears in the user interface, for example, dialog names,
tabs, buttons, menu commands
● Required inputs, for example, limits, tag values.
● Path information
Operational sequences, for example, menu commands, shortcut menu com‐
mands.
Keyboard operation
Numbers of the main menu in the LUI, part of the
menu name
Numbering of the menus downstream from the
main menu, part of the menu name
Introduces a text-dependent reference to a section or a paragraph in this docu‐
mentation. The page numbers are always specified in parentheses for references
in the document. Example of a reference (hyperlink):
→ References (Page 141)
Conventions on terminology
Convention/alternative name
"LUI" for short.
Defective reference
At the end of the paragraph/page: Text-independent reference
Introduction
1.5 Conventions
The square brackets identi‐
fy the chapter numbers that
precede the menu names.
15