System update
Follow these steps for updating the system image of the ConnectStation to
3.0.0 and higher.
Please note: if you want to update multiple ConnectStations, always up-
date them one at a time, not at the same time.
Download the image here:
▷
www.sennheiser.com/download
Store it to a FAT/FAT32 formatted USB device.
▷
▷
Do not change the name of the update file.
Insert the USB device into one of the USB ports of the ConnectStation.
▷
▷
The system image is displayed under Update & Reset in the System
tab of the Admin Interface.
►
Click on Install.
▷
►
Click OK to confirm the update.
System update
76