Troubleshooting using CLI
12. Set the IP address of the SNMP server using the command snmp-server host
Displaying system logs
Perform the following procedure to display system logs.
1. Log into the controller.
2. Press CTRL + Y on the keyboard to enter the console menu.
3. Select Command Line Interface from the menu.
4. Type the enable command to enter Privileged mode.
5. Use the command show logging system to display logs concerning Layer 2
6. Use the command show logging wireless-controller volatile to
Troubleshooting client-related issues
Perform the following procedure to troubleshoot client-related issues.
1. Log into the controller.
2. Press CTRL + Y on the keyboard to enter the console menu.
3. Select Command Line Interface from the menu.
4. Type the enable command to enter Privileged mode.
5. Use the command show wireless ap status to view the overall status of all
6. Use the command show wireless ap status <ap_mac_address> detail
20
Avaya WLAN 8100 Quick Start Guide
the command show snmp-server notification-control. Repeat this step
for all traps that must be enabled.
<ip_address>.
and Layer 3 operations.
display logs concerning controller operation.
registered access points.
to view detailed information about individual access points.
August 20, 2010