Chapter 2: WMS workflows
The following section provides workflows for commonly used WLAN Management System procedures.
This section contains the following topics:
•
Configuring wireless profiles
•
Adding an initial controller
•
Adding an access point
•
Applying policies
•
Configuring VLAN mapping
•
Configuring captive portals
•
Configuring RADIUS
•
Configuring voice networks
Adding a Mobility Domain
The following procedure is used to add a Mobility Domain.
1. Select the Configuration tab.
2. Right-click Mobility Domains.
3. Select Add Mobility Domain.
4. Enter the domain name in the Domain Name field.
5. Select the country of origin in the Country Code field.
6. Enter the base UDP port in the Base Port field.
7. Click Submit.
Adding an initial controller
The following procedure is used to add an initial controller to WMS. The initial controller will
be configured as the Mobility Domain Controller (MDC).
Avaya WLAN 8100 Quick Start Guide
on page 14
on page 13
on page 14
on page 17
on page 15
on page 16
on page 16
August 20, 2010
13