Enabling automatic PVID
Use the following procedure to enable the automatic PVID feature.
To enable automatic PVID, use the following command from Global Configuration
mode.
[no] auto-pvid
Use the no form of this command to disable
Configuring VLAN port settings
Use the following procedure to configure VLAN-related settings for a port.
To configure VLAN port settings, use the following command from Global Configuration
mode.
vlan ports [<portlist>] [tagging {enable | disable | tagAll |
untagAll | tagPvidOnly | untagPvidOnly}] [pvid <1-4094>]
[filter-untagged-frame {enable | disable}] [filter-
unregistered-frames {enable | disable}] [priority <0-7>] [name
<line>]
Configuring VLAN members
Use the following procedure to add or delete a port from a VLAN.
To configure VLAN members, use the following command from Global Configuration
mode.
vlan members [add | remove] <1-4094> <portlist>
Avaya WLAN 8100 Quick Start Guide
Setting up VLANs
August 20, 2010
11