Philips HP6511 Manual page 12

EnglisH
12
2 Press the release button (1) and pull the epilating head off the
appliance (2) (Fig. 9).
3 Remove the massaging element (Fig. 10).
4 Clean all accessible parts, including the bottom of the epilating head
and the epilating discs, with the brush (Fig. 11).
5 You can also rinse the epilating head (not the appliance!) under the
tap to clean it more thoroughly (Fig. 12).
Never try to detach the epilating discs from the epilating head.
6 Reattach the massaging element to the epilating head. Then place
the epilating head on the appliance and press it until it snaps home
('click') (Fig. 13).
The epilating head only fits onto the appliance in one way.
storage
1 Store the appliance and the accessories in the pouch.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 14).
- The built-in rechargeable batteries contain substances that may
pollute the environment. Always remove the batteries before you
discard and hand in the appliance at an official collection point.
Dispose of the batteries at an official collection point for batteries. If
you have trouble removing the batteries, you can also take the
appliance to a Philips service centre. The staff of this centre will
remove the batteries for you and will dispose of them in an
environmentally safe way (Fig. 15).
1 Remove the adapter from the wall socket and let the appliance run
until the batteries are empty.