Cleaning The Paper Path - Epson PM-401 Operation Manual

PM-401 Operation Guide
B
Enter Setup from the home screen using the l or
r button, and then press the OK button.
C
Select Maintenance using the u or d button, and
then press the OK button.
D
Select Print Head Alignment using the u or d
button, and then press the OK button.
E
Follow the on-screen instructions to print the
alignment pattern.
F
Follow the on-screen instructions to align the
print head. Find and select the number for the
most solid pattern in each group using the u or d
button, and then press the OK button.

Cleaning the Paper Path

When the printouts are smeared or scuffed or paper
does not feed correctly, clean the paper path inside the
printer.
c
Important:
Do not use tissue paper to clean the inside of the
printer. The print head nozzles may be clogged with
lint.
A
Load paper for cleaning in the printer.
❏ See steps 1 to 5 from "Printing Photos by
Selecting from a Memory Card" on page 23
for more details.
❏ When the printouts are smeared or scuffed,
load several sheets of paper.
❏ When paper does not feed correctly, load the
cleaning sheet that came with the paper.
B
Enter Setup from the home screen using the l or
r button, and then press the OK button.
C
Select Maintenance using the u or d button, and
then press the OK button.
Maintenance
D
Select Paper Guide Cleaning using the u or d
button, and then press the OK button.
E
Follow the on-screen instructions to clean the
paper path.
Note:
❏ Repeat this procedure until the paper is not
smeared with ink.
❏ When paper does not feed correctly, repeat
these steps two or three times.
❏ The cleaning sheet stops being effective after
feeding approximately three times.
39