IBM Power System Series Manual page 14

Use this information with your specific system unit and operating system documentation. General
information is intended for all users of this product. Service information is intended for a service
representative that is specifically trained on the system unit and subsystem being serviced.
Note: All SAS subsystem features for 8202-E4C, 8202-E4D, 8205-E6C, or 8205-E6D systems share the same
integrated base system board (custom card identification numbers (CCIN) 2B2C or 2B4A for the
two-socket model and 2B2D or 2B4B for the one-socket model). The physical location code for the base
system board is Un-P1.
Feature locations
Use Figure 1 and Table 1 to review the features and locations of the SAS base subsystem.
Figure 1. SAS base subsystem overview
Table 1. SAS base subsystem (feature code 5618) components
Diagram
location Part name
A Base backplane
B Tape drive (optional)
1
C DVD drive
D Disk drive backplane
E Disk drives (6 SFF drive disk
bays, 2 closed "filler" bays)
1
Feature is part of the SAS subsystem but separate from feature code 5618.
Use Figure 2 on page 3 and Table 2 on page 3 to review the features and locations of the SAS subsystem
with a two-way split drive backplane.
2
SAS subsystem
CCINs
1
2B2C, 2B2D, 2B4A,
or 2B4B
1
NA
NA
2BD5
NA
Physical location codes
Un-P1
Un-P1-D1 (SAS connector) or Un-P1-D2 (USB
connector)
Note: The tape drive bay is the same for both.
Un-P2-D9
Un-P2
Un-P2-D1 - Un-P2-D6