Connect Power; Set Time And Date - Philips DC291/98 User Manual

1
Open the battery compartment.
2
Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
‡
Remove battery if it is exhausted or will not be used
for a long time.
‡
Batteries contain chemical substances, so they should
be disposed of properly.
‡
Perchlorate Material-special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Caution
‡
Risk of explosion! Keep batteries away from heat,
VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHULHV LQ ÀUH
Note
‡
Before you press any function button on the remote
FRQWURO ÀUVW VHOHFW WKH FRUUHFW VRXUFH ZLWK WKH
remote control.

Connect power

Caution
‡
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on the
back or underside of the apparatus.
‡
Risk of electric shock! When you unplug the AC
power cord, always pull the plug from the socket.
Never pull the cord.
‡
Before connecting the AC power cord, ensure you
have completed all other connections.
Note
‡
The type plate is located on the bottom of the main
unit.
10 EN
1
Connect the AC power cord to:
‡ the AC ~ socket on the back of the
main unit,
‡ the wall outlet.

Set time and date

1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
» The hour digits begin to blink.
2
Press OK/ to select the 12/24 hour
format.
3
Press / to set the hour.
4
Press SET TIME/PROG WR FRQÀUP
» The minute digits begin to blink.
5
Repeat steps 3-4 to set the minute, year,
month, and day.
Tip
‡
In 12 hour format, [MONTH--DAY] is displayed.
‡
in 24 hour format, [DAY--MONTH] is displayed.
MP3 LINK FM
ANTENNA