Program Radio Stations Automatically; Program Radio Stations Manually; Select A Preset Radio Station; Other Features - Philips DC291/98 User Manual

Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1
In the tuner mode, press and hold SET
TIME/PROG for more than 2 seconds to
activate automatic program mode.
» [AUTO] (auto) is displayed.
» The unit automatically stores
UDGLR VWDWLRQV ZLWK VXIÀFLHQW VLJQDO
strength..
» 7KH ÀUVW SURJUDPPHG UDGLR VWDWLRQ LV
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press SET TIME/PROG to activate the
program mode.
3
Press / to select a number.
4
Press SET TIME/PROG WR FRQÀUP
5
Repeat the above steps to program other
stations.
Tip
‡
To overwrite a programmed station, store another
station in its place.
‡
To select FM stereo or FM mono, press OK.

Select a preset radio station

1
Press / to select a preset number.
14 EN

6 Other features

Set the alarm timer

You can set two alarms which go off at
different time.
1
Ensure that you have set the clock
correctly. (See "Get started - Set time
and date".)
2
Press and hold ALM 1 or ALM 2 for 2
seconds.
» [AL 1] or [AL 2] begin to blink.
3
Press SOURCE on the top panel to select
an alarm sound source: iPod/iPhone/iPad,
FM tuner, or buzzer.
4
Press ALM 1 or ALM 2.
» The hour digits begin to blink.
5
Press / repeatedly to set the hour.
6
Press ALM 1 or ALM 2 WR FRQÀUP
» The minute digits begin to blink.
7
Repeat steps 5-6 to set the minute.
8
Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
9
Repeat steps 5-6 to set the alarm volume.
Tip
‡
If you set iPhone/iPod playlist as the sound source,
you must create a playlist in iTunes called "PHILIPS"
and import it to your iPhone/iPod.
‡
If no playlist is created in the iPod/iPhone or there is
no song in the playlist, the unit will wake to songs in
the iPod/iPhone.