Table of Contents
Advertisement
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the unit.
•
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
•
Before connecting the power adapter, make sure that
you have completed all other connections.
•
Use the supplied power adapter only.
Turn on
Press
.
» The clock radio switches to the last
selected source.
Switch to standby mode
Press
to switch the clock radio to standby
mode.
» The clock (if set) is displayed.
Set time and date
1
In standby mode, press and hold TIME SET
on the back of your clock radio for more
than two seconds.
» [12H] or [24H] begins to blink.
2
Press
/
repeatedly to select 12/24
hour format.
3
Press TIME SET to confirm.
» The hour digits begin to blink.
4
Repeat steps 2-3 to set hour and minute.
Note
•
When iPod/iPhone is connected, the unit synchronizes
time from the iPod/iPhone automatically.
Tip
•
The accuracy of the transmitted time depends on the
docked iPod/iPhone that transmits the time signal.
EN
5
Advertisement
Table of Contents
