Get Started; Connect Power; Turn On; Set Clock - Philips AS141 User Manual

3 Get started

Always follow the instructions in this chapter in
VHTXHQFH
Caution
‡
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.

Connect power

Caution
‡
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the device.
‡
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Note
‡
The type plate is located on the bottom of the docking
system.
Connect the power adapter to:
‡ the DC IN socket of the docking system.
‡ the wall socket.
8 EN
All manuals and user guides at all-guides.com

Turn on

Press .
» The docking system switches to the last
selected source.
Switch to standby mode
Press again to switch the docking system to
standby mode.
» [OFF] appears for one second, then the
FORFN LI VHW LV GLVSOD\HG

Set clock

1
Press to switch the device to standby
mode.
2
Press and hold SET TIME for two seconds
to activate clock setting mode.
» The hour and minute digits begin to
blink.
3
Press / and
the hour and minute.
4
Press SET TIME WR FRQÀUP
» [12H] or [24H] begins to blink.
5
Press / to select 12/24 hour format.
6
Press SET TIME WR FRQÀUP
» The set time is displayed.

Select source

Press SOURCE repeatedly to select a source:
bluetooth, FM tuner, or MP3 link.
Note
‡
When an android phone is docked, the system
automatically switches to bluetooth mode.
/ repeatedly to set