Troubleshooting - JVC KD-R498 Instruction Manual

REFERENCES
Source name Display information (for KD-R492)
FM/AM/SW1/SW2 Frequency Clock
(For FM Radio Data System stations only)
Station name (PS)/Program type (PTY)
Radio text+ title/Radio text+ artist
the beginning)
CD or USB (For CD-DA)
Disc title/Artist
the beginning)
(For MP3/WMA/WAV/FLAC files)
Song title/Artist
Playing time
ANDROID When [AUTO MODE] is selected ( 9):
Song title/Artist
(back to the beginning)
AUX AUX Clock
(back to the beginning)
Radio text Radio text+
Frequency Clock
Track title/Artist Playing time Clock
Album name/Artist Folder name
Clock (back to the beginning)
Album name/Artist Playing time
(back to the beginning)

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK
WIRING THEN PWR ON"
(back to
appears.
"PROTECTING SEND
SERVICE" appears.
(back to
Source cannot be selected.
• Radio reception is poor.
File name
• Static noise while
listening to the radio.
Disc cannot be ejected.
Clock
"IN DISC" appears.
"PLEASE EJECT" appears.
Playback order is not as
intended.
Elapsed playing time is not
correct.
"NOT SUPPORT" appears
and track skips.
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
"CANNOT PLAY" flashes
and/or connected device
cannot be detected.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. ( 6)
Connect the antenna firmly.
Press and hold to forcibly eject the disc. Be careful not
to drop the disc when it is ejected.
Make sure nothing is blocking the loading slot when you
eject the disc.
Press , then insert the disc correctly.
The playback order is determined by the file name (USB)
or the order in which files were recorded (disc).
This depends on the recording process earlier.
Check whether the track is a playable format. ( 16)
• Reload the disc or reattach the USB device.
• Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 16)
• Reattach the device.
ENGLISH
17