Chapter 5
4. Create a network name for your guest network.
5. Select the
Security
6. Select
Schedule
guest network.
7. Click Save.
•
Guest Network Isolation
5. 8.
DHCP
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
5. 8. 1.
DHCP Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
DHCP
>
DHCP
type and create the
from the
Access Time
- If enabled, guests are isolated from each other.
Settings.
Configure the Router in Access Point Mode
Password
of the guest network.
drop-down list and customize it for the
81