Wireless Advanced - TP-Link AC750 User Manual

Chapter 4
2. Go to Wireless >
3. Click Enable to enable the Wireless MAC Filtering function.
4. Select Allow the stations specified by any enabled entries in the list to access
filtering rule.
5. Delete all or disable all entries if there are any entries already.
6. Click Add New and fill in the blank.
1 ) Enter the MAC address 00:0A:EB:B0:00:0B or 00:0A:EB:00:07-5F in the MAC
Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select Enabled
4 ) Click Save and click Back.
7. The configured filtering rules should be listed as the picture shows below.
Done!
Now only client A and client B can access your network.
4. 6. 5.

Wireless Advanced

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > Wireless
Wireless MAC Filtering.
in the Status drop-down list.
Advanced.
Configure the Router
as the
30