Access Control - TP-Link AC750 User Manual

Chapter 4

4. 12. Access Control

Access Control is used to deny or allow specific client devices to access your network
with access time and content restrictions.
I want to:
Deny or allow specific client devices to access my network with access tiem and
content restrictions.
For example, If you want to restrict the internet activities of host with MAC address 00-
11-22-33-44-AA on the LAN to access www.tp-link.com only, please follow the steps
below:
How can I do that?
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Access Control
1 ) Click Add New.
2 ) Select MAC Address
for the host in the
Address filed.
3 ) Click Save.
3. Go to Access Control
1 ) Click Add New.
2 ) Select URL Address
for the target in the
the full name or the keywords (for example TP-Link) in the
Note:
Any URL address with keywords in it (e.g. www.tp-link.com) will be blocked or allowed.
> Host and configure the host settings:
as the mode type. Create a unique description (e.g. host_1)
Description field and enter 00-11-22-33-44-AA in the
> Target and configure the target settings:
as the mode type. Create a unique description (e.g. target_1)
Target Description field and enter the domain name, either
Add URL Address
Configure the Router
MAC
field.
44