Operation - Master MAS-I252 User Manual

15. After that, put down the power plugs of the speakers, temperature sensor, control panel and CD player through the
hole near the fan on the top board. See FIG 15
16. Making sure all steps are finished correctly, plug in the power and try using the sauna at first to make sure it will
work properly. Then put the external top board (section 10) over the internal top board, and take out the power plug
through the corresponding hole in the external top board. See FIG-22
FIG-22 Slip the power plug through external top board
17. Take the screws affixed on the external top board, then set up the board using the cross screwdriver. See
FIG-23
Installation Completed.

Operation

FIG-23 Fix the external board with screws
8
EN