Master MAS-I252 User Manual page 38

1. Turn on the heater
Long press POWER button
first time to turn on the heater, long press the second time to turn off the heater. The heating temperature is last time's
setting, time is last time's setting.
2. Temperature setting
After heater is turned on, press TEMP- and TEPM+ to adjust the heater temperature. Temperature range is from 30
to 75°C, stepping temperature is 1°C. Fahrenheit degree range is from 86 to 167°F, stepping temperature is 5°F. When
temperature is lower than 30°C or 90°F, it shows LO.
Celsius and Fahrenheit switch: Press "TEPM-" and "LOCK" meanwhile for 5S to switch Celsius and Fahrenheit.
3. Time setting
Range from 5-60 minutes, stepping is 5, when the countdown is to 5 minutes, it will beep 3 times.
4. Light control (can be controlled separately)
On the status of system standby, press "LIGHT" button to turn on or turn off the lamp separately. If the indicator light
is on, it means lamp on, if the indicator light is off, it means the lamp is off.
When high voltage lamp is on, press 5S, time display shows 2n, temperature display shows Lx (x is 1-9)
（1）When it displays 2n, short press " LIGHT" button to change LED light color, pressing one time can change one
color.
（2） Within 8S without pressing "LIGHT"button, time display quits 2n, temperature display quits Lx, the color of LED lamp
remains current status and quits light control logic lock key function.
（3）It can open or close the LED light and high voltage lamp separately. On the status of 2n, press TIME- and TIME+
separately to turn on or turn off LED light or high voltage lamp.
7. Audio function (can be controlled separately)
（1）First press AUDIO button
device，search and match them, then it can play music. It takes 6 or 8S to match each other. Temperature display shows
to turn on or turn off the heater. On the status of system on, long press the
，indicator light is on, open Bluetooth, meanwhile open the Bluetooth in mobile
9
EN