Master MAS-I252 User Manual page 36

EN
10. Put the sitting board horizontally on corresponding battens of the backboard. See FIG-10
FIG-11 Assembling front board
11. Align the front board (section 3) with bottom board's corresponding battens, and then latch it with the left and right
boards respectively. Notes: Take caution of the glass door to avoid damage. See FIG-11.
12. Put the wires of front board and backboard into the cabinet to avoid pressing the wires during installing. See
FIG-12.Open the door, raise the top board high enough to see if it fits with the surrounding boards, then put down.
FIG-12 Setting the top board FIG-13 Leading the wires of heaters onto the
board through the corresponding hole
13. During the course of putting down the internal top board, make sure all the wires (mentioned above) and connecting
plugs are slipped through the corresponding holes of the top board. All these wires will be led into connecting with the
controller on the internal top board. See FIG-13
14. See FIG-14. Connect all the wires and connectors to the corresponding outlets on the top board. Please be sure all
the plugs are connected tightly.
FIG-14 Connectors on the internal top board FIG-15 Put down the wires into the sauna cabin
7