ADC 600F User Manual page 92

Maintenance
4 Enter any of these parameters at the prompt:
•
Type 1
10/100BASE port).
• Type 2
•
Type 3
• Type 4
5 Type 5 to reset the modem after you change the LAN IP address and the LAN IP
network mask.
82
then enter the LAN IP address for the modem (LAN port which is the
then enter the LAN IP network mask for the modem.
then enter the Default gateway IP address.
then enter the IP address for a device on the LAN that will manage the modem.
Megabit Modem 400F, 500L, 600F, and 700F User Manual