ADC 600F User Manual page 29

1 After you have set the MDI/MDI-X switch to the correct position, connect the black cable
from the modem 10/100BASE-T port to your PC or hub.
2 Connect the grey phone cord from the modem ADSL port to the ADSL wall jack. If your
installation requires a splitter or microfilter, refer to the manufacturer's documentation for
further instructions.
3 Connect the power cable from the modem power connector to a power outlet.
If you need pinouts for the ADSL and 10/100BASE-T connectors, see
page 101. For information on how to use the RS-232 management port for maintenance, see
"Using the RS-232 Management Port" on page
Megabit Modem 400F, 500L, 600F, and 700F User Manual
Chapter 3: Installing the Modem
80.
"Connector Pinouts" on
19