ADC 600F User Manual page 43

Listed in the table below are the default values for the Megabit Modem in Bridge/Router mode.
Reference this table to learn the values assigned to the modem after resetting it to factory
default.
Parameter
Brouter WAN Configuration
Service Name
ATM VPI
ATM VCI
Bridging
Port Priority
Routing
RIP Direction
RIP Version
IP Address
IP Net Mask
Encapsulation
Static Mac Address Entry
MAC Address
Source Port
Dest Port
Static Route Entry
(IP Address, IP Network Mask,
Gateway IP Address)
Megabit Modem 400F, 500L, 600F, and 700F User Manual
Default Value Parameter
Bridge/Router RFC 1483
Not selected Spanning Tree
blank field Brouter LAN Configuration
0 Bridging
100 Port Priority
Enabled Routing
101 RIP Direction
Disabled RIP Version
Both IP Address
Rip1 IP Net Mask
0.0.0.0 Default gateway IP Address
0.0.0.0 Default gateway IP Net Mask
LLC DHCP
all zeros Start IP Address
0:0:0:0:0:0 End IP Address
0 Primary DNS
0 Gateway
0.0.0.0
Chapter 4: Setting Up For Configuration
Default Value
Selected
Enabled
100
Disabled
Both
Rip1
192.168.0.1
255.255.255.0
192.168.0.1
255.255.255.0
Not enabled
192.168.0.2
192.168.1.1
192.168.0.1
192.168.0.1
33