ADC 600F User Manual page 84

Viewing ADSL Status
Reference the following table for a description of the System Status parameters.
Information
ADSL Link Status
Alarms
Current SNR Margin
Min SNR Margin
Errored Seconds
Unavailable Seconds
Line Attenuation
Data Rate
1 From the adsl
2 Monitor the ADSL Status.
3 Click Refresh
74
Description
Shows the status of the ADSL connection between the modem and the service
provider.
Identifies conditions on the ADSL link that are reported as an alarm such as: Loss of
Sync (LOS), Loss of Frame (LOF), Loss of Margin (LOM), or Loss of Cell Delineation
(LCD).
Shows the Signal-to-Noise Ratio (SNR) margin (signal clarity), in decibels, at which
the modem is currently operating.
Indicates the minimum SNR margin allowed before the ADSL MAR LED on the
modem front panel lights.
Shows the total number of seconds that ADSL link errors occurred during a 24-hour
period or since the ADSL link was reset.
Shows the total number of seconds the ADSL link was not available for transmission
since either the modem was powered on or the ADSL statistics were last cleared.
Shows the loss of signal power in the transmission in decibels.
Shows the rate of data transmission in kilobits per second (kbps).
menu, click status to open the ADSL Status window.
to update the statistics or Clear to clear the statistics.
Megabit Modem 400F, 500L, 600F, and 700F User Manual