Rowenta Clean&Steam Multi Manual page 13

PROBLEMS
The appliance is not
cleaning the floor very
well.
The appliance is no longer
lighting up.
The floor is very wet after
steaming.
Brown stains are visible on
the floor after use.
The vacuum function does
not work
Steam does not come out
of the accessories
Steam is escaping from the
side of the appliance.
POSSIBLE CAUSES
The pad is saturated.
The on/off button is not position "off".
Your appliance is not connected to the
power supply.
The pad is too wet.
You are using chemical descaling
products or additives in the water tank.
The portable steam cleaner is not well
connected
Accessories are clogged or there is no
clean mode selected
Limescale builds up on the heating
element.
SOLUTIONS
Clean the pad.
Turn it on.
Check that the power cord is plug-
ged in.
Clean it, use the Eco steam
position, or install a new pad.
Never add any products to the
water tank. Contact an Approved
Service Centre.
Check the condition of the
connectors and the proper clipping
of the portable steam cleaner
Change accessories or select Eco/
Max position and press the steam
button.
Check if the appliance works
without the flexible hose and its
accessories. In that case, change
the flexible hose and/or its
accessories.
Otherwise, contact the Groupe
SEB Consumer Service or go to the
nearest Authorized Service Centre.
EN
13