Rowenta Clean&Steam Multi Manual page 12

order to make sure that no changes in color or deformation have
occurred.
ENVIRONMENT
• In accordance with existing regulation, any end-of-life appliances must be taken to an approved Service Centre
which will take responsibility for managing their disposal.
Think of the environment!
Your appliance contains many materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
TROUBLESHOOT/FAQ
PROBLEMS
The appliance is not
working properly or is
making a whistling noise.
Dust or debris is falling
back out onto the floor.
The appliance is no longer
generating steam.
A large amount of steam is
coming out of the suction
apparatus.
12
POSSIBLE CAUSES
The head or the air passage is obs-
tructed.
The dust compartment is full.
The dust compartment is installed
incorrectly.
The suction apparatus is clogged.
The foam filter is saturated.
The dust compartment is full. The filter
is missing or incorrectly installed.
Your appliance is not connected to the
power supply.
The water tank is empty.
The antiscale cartridge is incorrectly
installed.
The absorption nozzle is not immersed.
You are in Max position.
SOLUTIONS
Remove the air passage or the suc-
tion apparatus and clean it.
Empty it and clean it.
Reposition it correctly.
Empty it and clean it.
Clean the filter.
Empty the dust compartment.
Clean the filter and install it cor-
rectly.
Check that the power cord is
plugged in and that the on/off
button is position "on".
Fill the water tank.
Reposition it correctly.
Shake the water tank to immerse
the nozzle.
Opening system
Water Level
The nozzle
Reduce the steam power.